Here is another Gartside soft hackle streamer pattern I tye. This one is called a "Fishfinder", and it is very seductive in the water. When I look at the design of this fly, marabou seems like a beautiful material to work with (tons of motion in the water, soft texture so that fish may hold onto the fly longer, cheap and easy to get, substantial profile/bulk without adding lots of weight to the fly, etc.). I like the simplicity of these flies and how easily it can be modified (change size, shape, color, etc.). They are very similar in construction to some of the flatwing streamer flies, only a lot softer.
Gartside's Fishfinder Soft Hackle Streamer

Hook - Do-It Spinnerbait Hook (Model 455/Size 4 or 2)
Thread - White UNI-Thread (6/0)
Tail - Four Grizzle Streamer Hackles
Body - Two Marabou Plumes/Cream Colored (tyed in by the tip, folded and wrapped forward)
Collar - Wood Duck (tyed in by the tip, folded and wrapped in front)
Head - White tying thread coated with clear nail polish
After you have tyed in the grizzly hackle tail, pick out a nice soft (whispy) marabou plume. I like to remove any fibers at the base of the plume that look matted or are too bulky. Now carefully pull back the fibers on each side of the marabou plume until you find the center stem and the tip of the plume. pull back the fibers on each side to expose the last inch of the plume. I then lay the plume over the fly with the tip fibers pointed over the back of the fly and tye it onto the hook. Advance your thread forward to the eyeof the fly to get it out of the way. Now, pinch the base of the marabou plume by the base of the feather with your right hand (assuming your right handed). Use your left hand to stroke the fibers of the marabou all to one side. Pinch the fibers back with your left hand and start to wrap the stem of the plume around the shank of the hook. As you wrap forward, you will need to continuously stroke the fibers backwards to keep them from getting trapped under the stem. Continue forward until you run out of plume. At this point, back off your tying thread and then secure the stem of the marabou plume. I then take a bodkin and make sure that all of the marabou fibers are free to move towards the back of the fly. Repeat this process with a second plume of marabou and the collar material.
It may sound complicated, but it is quite simple. It is basically the same technique used to form soft hackle flies (this is just done with marabou). The only trick is to keep messing with the fibers to pull them back out of the way after each wrap. If you lightly moisten the marabou fibers, it may make them easier to control.
Tying Sequence Shown in Photos:
